Buscando :: Micro JPM

1000mAh 7.4v - Lithium Ion Battery [PRT-11855]

https://www.microjpm.com/products/polymer-lithium-ion-battery-1000mah-7-4v/

de artículos en existencia: 0 Disponibilidad: Solicitado Vendedor: SPARKFUN.COM AGOTADO!! Description: This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires

Especificación 223,4 kB

Solenoid - 36v [ROB-10391]

https://www.microjpm.com/products/solenoid-36v/

as. De acuerdo con la hoja de datos de este solenoide esta diseñada para 36V pero funciona excelente con 12V. Los hemos estado controlando Arduino Power Driver Shield , hay además un código de ejemplo. Con un desplazamiento de 10mm estos solenoi

Especificación 220,4 kB

OBD-II to DB9 Cable [CAB-10087]

https://www.microjpm.com/products/obd-ii-to-db9-cable/

2 7 Chassis Ground 4 2 Signal Ground 5 1 CAN High J-2284 6 3 ISO 9141-2 K Line 7 4 J1850 BUS- 10 6 CAN Low J-2284 14 5 ISO 9141-2 L Line 15 8 Battery Power 16 9 Documents: Pinout Diagram Para más detalles ver el siguiente enlace: www.sparkfun.com/

Especificación 221,8 kB

BLE Bee CC2541 With XBee Socket For Arduino

https://www.microjpm.com/products/ble-bee-cc2541-with-xbee-socket-for-arduino/

0.3 0 0.5 V Current Consumption - - 15 mA Revision History Rev. Description Release date v1.0 Initial version 2015-06-11 V1.1 Add GPIO function; Add ADC function; Add remote GPIO & ADC control. Add error messages’ instruction for users to check. 20

Especificación 228,5 kB

SparkFun RFM69 Breakout (915MHz) [WRL-12775]

https://www.microjpm.com/products/sparkfun-rfm69-breakout-915mhz/

África. Consulte los reglamentos locales para otras áreas. GET STARTED WITH THE RFM69HCW HOOKUP GUIDE Dimensions: 0.8" x 1.1" Features: Transmit power: -18dBm (0.016mW) to +20dBm (100mW) in 1dBm steps Receive sensitivity: down to -120dBm at 1.2k

Especificación 225,9 kB

SparkFun microSD Shield [DEV-12761]

https://www.microjpm.com/products/sparkfun-microsd-shield/

ketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1" pitch PTHs. This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed. We recommend t

Especificación 221,7 kB

MQ-8 Hydrogen Gas Sensor Breakout Board

https://www.microjpm.com/products/mq-8-hydrogen-gas-sensor-breakout-board/

sistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC. This sensor comes in a package similar to our MQ-3 alcohol sensor, and can be used with the brea

Especificación 219,5 kB

Coin Cell Battery Holder - 2xCR2032 (Enclosed)

https://www.microjpm.com/products/coin-cell-battery-holder-2xcr2032-enclosed/

a two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back. Para más detalles ver el siguiente enlace:

Especificación 218,6 kB

MicroSD card breakout board+ [PID:254]

https://www.microjpm.com/products/microsd-card-breakout-board/

N: Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease on either 3v or 5v systems Use

Especificación 222,7 kB

DM13A 16-bit Constant Current LED Driver

https://www.microjpm.com/products/dm13a-16-bit-constant-current-led-driver/

ures - Constant-current outputs: 3mA to 60mA adjustable by one external resistor - Maximum output voltage: 17V - Maximum clock frequency: 25MHz - Power supply voltage: 3.3V to 5V - In-rush current control - Bit-to-bit skew : ± 3 % Chip-to-ch

Especificación 217,8 kB

Buscar en el sitio