Buscando :: Micro JPM

Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

https://www.microjpm.com/products/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi-mini-kit/

can stack up to 62 of them to control up to 992 servos - all with the same 2 pins! Works with any servo that can be powered by 5V and take 3.3V logic level signals. Best of all, we even have a Python library you can use, so you'll be up and running i

Especificación 223,4 kB

UM66T-32L Simple Melody Generator

https://www.microjpm.com/products/ad63571/

pocos componentes adicionales. Características: - Memoria ROM de 64 notas - Oscilador RC integrado - Bajo voltaje de operación: 1.3V a 3.3V - Modo Level-hold para reproducir repetidamente - Bajo consumo de potencia - Un speaker dinámico puede ser

Especificación 218 kB

LM386 Sound Detection Voice Sensor

https://www.microjpm.com/products/ad30944/

sensitivity : 52dB - Frequency range : 50Hz ~ 20KHz - Power: 3.3V ~ 5.3V - Mounting holes size: 2.0mm Applications - Ambient sound detection - Sound level detection How to Use in the case of working with a MCU: - VCC: 3.3V ~ 5.3V - GND: power supply

Especificación 219,4 kB

FONA 808 Shield - Mini Cellular GSM + GPS for Arduino [PID:2636]

https://www.microjpm.com/products/adafruit-fona-808-shield-mini-cellular-gsm-gps-for-arduino/

e any 'Android' or 'iPhone'-compatible headset with mic Breakouts for external 32Ω speaker and electret mic if you don't want to use a headphone Level shifting circuitry to make it Arduino-safe Vibrational motor (buzzer) driver so you can have

Especificación 231,9 kB

MAX31855 Sensor Module + K Type Thermocouple

https://www.microjpm.com/products/sainsmart-max31855-module-k-type-thermocouple-sensor-module/

0.25 degree increments - note that K thermocouples have about ±2°C to ±6°C accuracy Internal temperature reading 3.3 to 5v power supply and logic level compliant! SPI data output requires any 3 digital I/O pins. Etiquetas : POS: C27-STE-4C | MAX3

Especificación 220,3 kB

TMP102 - Digital Temperature Sensor Breakout [Generic]

https://www.microjpm.com/products/ad36085/

.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V. I2C communication uses an open drain signaling, so there is no need to use level shifting. Enlace de referencia: www.sparkfun.com/products/13314 Etiquetas : POS: 2F-35 | T

Especificación 217,9 kB

STR-W6753 Primary Switching Regulator

https://www.microjpm.com/products/ad38915/

ttom of VDS and turns on the MOSFET at the second bottom point, to minimize an increase of operating frequency at light output load, improving system-level efficiency over the entire load range. There are two standby modes available to reduce the inp

Especificación 218,4 kB

TL972 Very Low Noise Operational Amplifier

https://www.microjpm.com/products/ad38823/

V at V operational amplifiers operates at voltages as low as CC = ±2.5 V ±1.35 V and features output rail-to-rail signal swing. • Very Low Noise Level: 4 nV/√Hz The TL97x boast characteristics that make them • Ultra-Low Distortion: 0.003% pa

Especificación 220,3 kB

SD Card Shield Module For Arduino

https://www.microjpm.com/products/ad36462/

eatures: - Standard Arduino expansion board interface, shape, compatible with Arduino UNO, Leonardo, Mega 2560 and compatible motherboards - Built in level shifters make it safe to interface to bot 5V and 3.3V logic levels. - Communication interface

Especificación 219,7 kB

FONA - Mini Cellular GSM Breakout uFL Version [PID: 1946]

https://www.microjpm.com/products/fona-mini-cellular-gsm-breakout-ufl-version/

k. Use any 'Android' or 'iPhone'-compatible headset with mic Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone Level shifting circuitry so you can run it with 2.8V to 5V logic. Vibrational motor (buzzer) driver

Especificación 228,9 kB

Buscar en el sitio