Buscando :: Micro JPM

SparkFun RFM69 Breakout (915MHz) [WRL-12775]

https://www.microjpm.com/products/sparkfun-rfm69-breakout-915mhz/

África. Consulte los reglamentos locales para otras áreas. GET STARTED WITH THE RFM69HCW HOOKUP GUIDE Dimensions: 0.8" x 1.1" Features: Transmit power: -18dBm (0.016mW) to +20dBm (100mW) in 1dBm steps Receive sensitivity: down to -120dBm at 1.2k

Especificación 225,9 kB

FONA - Mini Cellular GSM Breakout uFL Version [PID: 1946]

https://www.microjpm.com/products/fona-mini-cellular-gsm-breakout-ufl-version/

h 2.8V to 5V logic. Vibrational motor (buzzer) driver so you can have noiseless notifications uFL connections for external antenna Indicator LEDs for power and network connectivity Standard SIM slides into the back On its own, this module can't do an

Especificación 228,9 kB

MQ-8 Hydrogen Gas Sensor Breakout Board

https://www.microjpm.com/products/mq-8-hydrogen-gas-sensor-breakout-board/

has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC. This sensor

Especificación 219,5 kB

Coin Cell Battery Holder - 2xCR2032 (Enclosed)

https://www.microjpm.com/products/coin-cell-battery-holder-2xcr2032-enclosed/

a two phillips head screws. Each battery holder will run batteries in series, output up to 6V, and is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back. Para más detalles ver el siguiente enlace:

Especificación 218,6 kB

VCNL4010 Proximity/Light sensor

https://www.microjpm.com/products/vcnl4010-proximity-light-sensor/

t is 5 volt compliant so you can use it with 3.3V or 5V logic with no risk of damage. There is an onboard 3.3V ultra low dropout regulator so you can power it with 3.3 to 5.0V. However, if you can give it 5.0V that is ideal since the VIN voltage powe

Especificación 223,9 kB

TCS34725 - RGB Color Sensor with IR Filter and White LED

https://www.microjpm.com/products/tcs34725-rgb-color-sensor-with-ir-filter-and-white-led/

ble integration time and gain so it is suited for use behind darkened glass. We add supporting circuitry as well, such as a 3.3V regulator so you can power the breakout with 3-5VDC safely and level shifting for the I2C pins so they can be used with 3

Especificación 221,7 kB

Blower - Squirrel Cage (12V)

https://www.microjpm.com/products/thermal-printer1/

Especificación 219,1 kB

25x30x25mm Heatsink Black For L298N

https://www.microjpm.com/products/a25x30x25mm-heatsink-black-for-l298n/

r de sus tarjetas y circuitos integrados. Cada uno de estos disipadores anodizados negros es perfecto cuando se utiliza junto con nuestro ESP32 Thing Power Control Shield, pero también se ajusta al paquete TO-220. Documentos: Etiquetas : POS: 5F-

Especificación 218,4 kB

Green LED - 3W to Aluminum PCB

https://www.microjpm.com/products/ad29579/

Especificación 221,2 kB

LED Cube RED DIY Kit 8x8x8

https://www.microjpm.com/products/ad30338/

O 3mm - 2 x XH2.54 - 40Pin hembra redondo - 9 x 20P IC socket (base integrado) - 9 x 74HC573 DIP - 1 x USB a DC005 cable de alimentación - 1 x DC005 power socket - 1 x 18P IC socket - 1 x ULN2803 DIP - 1 x 40P IC socket - 1 x STC12C5A60S2 (programad

Especificación 222,1 kB

Buscar en el sitio