ITEAD 4 Buttons Joystick Shield Module For Arduino

Producto nº: AD16766
Tu precio: US$12,95
No. de artículos en existencia: 4
Disponibilidad: En existencia
  • Vendedor: ITEADSTUDIO

Descripción:

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

Specifications

PCB size 53.3mm X 68.6mm X 1.6mm
Power supply 5V/3.3V DC
RoSH Yes

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 3 5 5.5 VDC
Input voltage VH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input voltage VH (Target Voltage = 5V) 4.5 5 5.5 V
Input voltage VL -0.3 0 0.5 V
Current Consumption - 20 40 mA

Hardware

IM120417014_ITEAD_Joystick_shield.jpg

Pins description

Pin Output type Description
D0 NA No Connection
D1 NA No Connection
D2 NA No Connection
D3 Digital Button E Output
D4 Digital Button D Output
D5 Digital Button C Output
D6 Digital Button B Output
D7 Digital Button A Output
D8 Digital Button F Output
D9 Digital Button G Output
D10 NA No Connection
D11 NA No Connection
D12 NA No Connection
D13 NA No Connection
A0 Analog Joystick Y Ouput
A1 Analog Joystick X Ouput
A2 NA No Connection
A3 NA No Connection
A4 NA No Connection
A5 NA No Connection
 

Para más detalles ver el siguiente enlace: www.itead.cc/wiki/ITEAD_Joystick_shield